Sony DSR-1500 User Manual
Page 29
29
Recording
C
h
apt
er 2
Rec
o
rding
a
nd Pla
y
bac
k
a) The indicators without the corresponding optional boards (DSBK-1501/1503/1504/1504P)
installed in the unit do not light.
Caution
Once you have started recording, you cannot change the input signal
selection.
6
Select the audio mode.
Select either two-channel mode (2 CHANNEL) or four-channel mode (4
CHANNEL) with the REC MODE menu item (see page 65). The
corresponding indicator lights in the REC MODE display.
Cautions
• In the DVCAM format, there are two audio recording modes, with either
two channels at 48 kHz or four channels at 32 kHz. It is not possible to
select other modes (for example with four channels at 48 kHz).
• During audio editing, if a signal used in assemble or insert editing is in a
different mode from the base tape, the signals will be discontinuous at the
edit points, and correct editing will not be obtained. For this reason, audio
editing between different modes is inhibited on this unit.
For smooth editing operations, check the audio recording mode of the
base tape beforehand.
• Once you have started recording, you cannot change the audio mode
selection.
• If on a tape there is a point where the audio mode is switched, it is not
possible to carry out insert editing over a section including that point.
• When, in 4-channel mode, analog audio is selected for all four channels
(channels 1/2 and 3/4), the same analog audio signals are recorded on
channels 1 and 3 and on channels 2 and 4, respectively.
Audio input signal
(input connector)
Corresponding INPUT
SELECT button
Lit indicator in the
INPUT signal display
section
a)
Analog signal
(AUDIO IN 1/3 and
AUDIO IN 2/4)
CH1 1/2 and CH2 3/4
ANALOG in AUDIO
group
AES/EBU signal
(AUDIO (AES/EBU) IN)
CH1 1/2 and CH2 3/4
AES/EBU in AUDIO
group
SDI signal
(SDI/SDTI (QSDI) IN)
CH1 1/2 and CH2 3/4
SDI in AUDIO group
SDTI (QSDI) signal
(SDI/SDTI (QSDI) IN)
SDTI/i.LINK
SDTI
i.LINK-compatible digital
audio signal in DV format
(i.DV IN/OUT)
SDTI/i.LINK
i.LINK
Internal test audio signal CH1 1/2 and CH2 3/4
SG in AUDIO group
Audio mode
Lit indicator in the REC MODE display
2-channel mode
2CH
4-channel mode
4CH