Sony SLV-EZ11AZ - Manual (Page 6)

Getting Started
6
Step 2: Setting up the remote commander (continued)
Manufacturer
Sony 01* 1 ,02
Akai 68
Blaupunkt 10
Ferguson 52
Grundig 11* 1
Hitachi 24
ITT/Nokia 15,16,69* 3
JVC 33*
Loewe 45
Mivar 09, 70
NEC 66
Panasonic 17* 1 ,49
Manufacturer
Philips 06* 1 ,07* 1 ,08* 1
Saba 12,13
Samsung 22,23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43* 2
Toshiba 38
Code number Code number
Controlling other TVs with the remote commander
(SLV-EZ44AZ/EZ22AZ only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer’s code
number.
1
Set TV / VIDEO at the top of the remote commander to TV .
2
Hold down ?/1, and enter your TV’s code number(s) using the
programme number buttons. Then release ?/1.
Now you can use the ?/1, VOL +/–, PROG +/–, programme number
buttons, ? (ten’s digit) and TV/VIDEO buttons to control your TV. You
can also use the buttons marked with a dot (•) to control a Sony TV. To
control the VCR, reset TV / VIDEO to VIDEO .
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.