Sennheiser SKP 3000 - Manual (Page 21)

53
The frequencies are tunable in 5-kHz steps within a
switching bandwidth of 36 MHz max
.
Note:
When operating a multi-channel system, make sure to only
use frequencies that are intermodulation-free.
Adjusting the sensitivity – SENSIT
Via the “ SENSIT ” menu, you can adjust the transmitter’s
input sensitivity.
For monitoring the adjusted sensitivity, the transmitter’s level
display for audio signal “AF”
ቨ
always indicates the audio
level – even if the transmitter is muted.
In order to be able to use highly sensitive directional condenser
microphones, the plug-on transmitter offers a sensitivity range
extended by 20 dB.
The following figures are a guide to the best settings :
The sensitivity is correctly adjusted when
the level display for audio signal “AF”
ቨ
shows full deflection only during the
loudest passages.
dynamic
microphones directional
condenser
microphones
Loud music/vocals –30 to –20 dB –50 to –40 dB
Presentations –20 to –10 dB –40 to –30 dB
Interviews –10 to 0 dB –30 to –20 dB
ቨ