Sunpentown Intl Double Door Refrigerator RF-322W User Manual

Page 2

Advertising
background image

2

INSTALLING YOUR REFRIGERATOR

UNPACKING YOUR REFRIGERATOR

WARNING: The refrigerator should be moved with two or more people.

Failure to do so can result in back or other injury.

Remove tape and any labels from the refrigerator before using (except the rating

label).

To remove any remaining tape or glue, rub the area briskly with your thumb.

Tape or glue residue can also be easily removed by rubbing a small amount of liquid

dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive

cleaners to remove tape or glue. These products can damage the surface of your

refrigerator.

When moving the refrigerator, do not tilt the refrigerator beyond 45°from upright
position.


DANGER or WARNING:
1. Risk of child entrapment. Before you throw away your old refrigerator or freezer:

Take off doors.

Leave the shelves in place so that children may not easily climb inside.

2. Do not use extension cords.

CLEANING BEFORE USE

After you remove all of the packing materials, clean the inside of your refrigerator before

using it.

SPACE REQUIREMENTS

WARNING: Keep flammable materials and vapors, such as gasoline, away form

refrigerator.

Failure to do so can result in death, explosion, fine or burns.

To ensure proper ventilation for your refrigerator, allow 8 inches of clearance on both

sides, 4 inches on the backside and 12 inches on the top.

If you are installing your refrigerator next to a fixed wall, leave sufficient space on the

hinge side to allow room for the door to swing open.

Never install your refrigerator near a heat source and under direct sunlight.

Advertising