Sony STR-DG500 - Manual (Page 72)

72 GB
F:\Sony SEM
HA\Revision5_DG500\JC060283_2662258132DG500_GB\2662258132\GB05AMP_STR-DG500-
CEL.fm masterpage: Left
STR-DG500
2-662-258-13 (2)
Models of area code AR, KR
Stereo Power Output
1)
, Reference Power
Output
1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
85 W + 85 W
1)
,
70 W + 70 W
3)
, 110 W/ch
8 ohms 1 kHz, THD 0.7%
100 W + 100 W
1)
,
90 W + 90 W
3)
, 120 W/ch
8 ohms 1 kHz, THD 10%
125 W + 125 W
1)
,
110 W + 110 W
3)
,
150 W/ch
Models of area code TH6
Stereo Power Output
1)
, Reference Power
Output
1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
70 W + 70 W
1)
,
60 W + 60 W
3)
, 90 W/ch
8 ohms 1 kHz, THD 0.7%
80 W + 80 W
1)
,
70 W + 70 W
3)
, 100 W/ch
8 ohms 1 kHz, THD 10%
100 W + 100 W
1)
,
90 W + 90 W
3)
, 125 W/ch
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there may be no sound
output.
3)
Measured under the following conditions:
Frequency response
Analog 10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog Sensitivity: 500 mV/
50 kohms
S/N
4)
: 96 dB
(A, 500 mV
5)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital ( Optical ) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/10 kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
4)
INPUT SHORT (with sound field and tone
bypassed).
5)
Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo 76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo 0.3%/0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK, AR, KR,
TH6, SP 230 V AC, 50 Hz
E2, AU 240 V AC, 50 Hz
TW 110 V AC, 60 Hz
Area code Power requirements
AR, KR, TH6 220 V AC, 50 Hz
GB01COV_STR-DG500-CEL.book Page 72 Thursday, March 16, 2006 12:10 PM