SECO-LARM USA Enforcer DP-121Q - Manual (Page 8)

ENFORCER VIDEO DOOR PHONE
8 SECO-LARM U.S.A., Inc.
Operating Instructions (cont):
Monitoring the entrance:
1. To see and hear what is going on at the
entrance, lift the handset and press the
Camera Button. The camera and monitor will
automatically switch on.
2. If the optional additional camera is installed,
pressing the Camera Button a second time will
switch the image displayed on the monitor to
the view from the other camera. Pressing the
camera button again will turn off the cameras.
3. When finished, simply hang up the handset
and the camera will switch off. If the handset is
not hung up, the camera will automatically
switch off after 2 minutes.
LED Indicator:
A status LED indicator is located on
the front of the monitor. The LED
displays power information as well as
the status of the handset.
LED Indicator
Green LED – Solid green LED
indicates standby mode. Flashing
green LED indicates camera “on”.
(2 monitors only)
Red LED – Solid red LED indicates
standby mode. Flashing red LED
indicates camera “on”.
Dimensions:
ENFORCER
7 11 /
16
(196mm)
3 15 /
16
(100mm)
5 1 /
4
(134mm)
1 1 /
2
(38mm)
9 5 /
8
(245mm)
3 1 /
8
(79mm)
®
ENFORCER
Camera Button