Sony CPD-L133 - Manual (Page 34)

14
Customizing Your Monitor
OPTION
26
: UNLOCK
BACKLIGHT
Setting the Power Saving Delay
Time
You can set the delay time before the monitor enters the
power saving mode. See page 17 for more information on
this monitor’s power saving capabilities.
1 Press the MENU button.
The MENU OSD appears.
2
Press the ø / ‡ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
3 Press the ø / ‡ buttons to select ZZ... (PWR SAVE
DELAY).
4 Press the +/– buttons to select the desired time.
When PWR SAVE DELAY is set to OFF, the monitor
does not go into power saving mode.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
Adjusting the Backlight
If the screen is too bright when you are using the monitor in
a dark room, adjust the backlight.
1
Press the MENU button.
The MENU OSD appears.
2 Press the ø / ‡ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
3 Press the ø / ‡ buttons to select (BACKLIGHT).
4 Press the +/– buttons to adjust the light level.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM
COLOR
LANGUAGE
OPTION
MENU OK
MENU
MENU
OPTION
: 1 M
: UNLOCK
OSD H POSITION
MENU
EXIT
PHASE
PITCH
CENTER
ZOOM
COLOR
LANGUAGE
OPTION
MENU OK
MENU
MENU
OPTION
: 1 M
: UNLOCK
OSD H POSITION
OPTION
6 0 M I N
1 M I N
5SEC
OFF
PWR SAVE DELAY