Sony 3-287-077-14(2) - Manual (Page 20)

20 GB
4
Press ENTER on the unit.
The drive name of the mobile phone
appears in the display but varies
depending on the specification of the
mobile phone.
5
Turn OPERATION DIAL on the
unit to select the drive you want.
6
Press ENTER on the unit.
7
Start playback of the audio files
in the selected drive of the
mobile phone or start
transferring.
To remove the USB device
Use the buttons on the unit for this
operation.
1
Press to select the USB
function.
2
Hold down x in stop mode until
“NO DEVICE” appears.
3
Remove the USB device.
Folder and file generation rules
When transferring to an USB device, a
“MUSIC” folder is created directly below
the “ROOT”. Folders and files are
generated within this “MUSIC” folder as
follows according to the transferring
method and source.
CD-USB Synchronized Transfer
1)
REC1 Transferring
Analog Transferring
1)
In Program Play mode, the folder name is
“PGM_xxx”, and the file name depends on
the transferring source (AUDIO CD or MP3
disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereafter.
4)
File numbers are assigned serially thereafter.
5)
A new file is transferred in the “REC1” folder
each time REC1 Transferring is performed.
Transfer-
ring source Folder name File name
MP3 Same as the transferring
source
2)
AUDIO CD “CDDA001”
3)
“TRACK001”
4)
USB
Transfer-
ring source Folder name File name
MP3
“REC1”
5)
Same as the
transferring
source
2)
AUDIO CD “TRACK001”
4)
Transfer-
ring source Folder name File name
FM “TUFM001”
3)
“TRACK001”
4)
AM “TUAM001”
3)
TAPE “TAPE001”
3)
AUDIO “EXAU001”
3)
DMPORT “EXDP001”
3)