Sony 3-287-077-14(2) User Manual
Page 22
22
GB
To remove the USB device
Use the buttons on the unit for this
operation.
1
Press
to select the USB
function.
2
Hold down x in stop mode until
“NO DEVICE” appears.
3
Remove the USB device.
To erase audio files or folders from
the USB device
You can erase audio files or folders from
the USB device.
1
Connect a transferable USB device
to the
(USB) port on the unit.
2
Select the USB function.
3
Press .
/
> or
+/–
repeatedly to select the audio file or
folder you want to erase.
4
Press ERASE on the unit.
“TRACK ERASE” or “FOLDER
ERASE”, and “PUSH ENTER” appear
alternately in the display.
To cancel the erase operation, press x.
5
Press ENTER.
The selected audio file or folder is
erased.
Other operations
1)
When playing an VBR (variable bit rate)
audio file, the system may resume playback
from a different point.
To change the play mode
Press PLAY MODE repeatedly while the
USB device is stopped.
You can select
– Normal play (all files in the folder on
the USB device) (“
” lights up).
– Normal play (all files on the USB
device) (“
”, “SHUF” and “PGM”
light off).
– Shuffle play (“SHUF” or “
SHUF”
lights up).
– Program play (“PGM” lights up).
Notes on the USB device
• You cannot change the play mode during
playback.
• Some time may be needed to start playback
when:
– the folder structure is complex.
– the memory capacity is excessive.
To
Press
Pause playback
X
(or NX
on the unit).
To resume play, press
the button again.
Stop playback
x
. To resume play,
press N (or press NX
on the unit).
1)
To cancel
resume play, press the
button twice and check
that “RESUME”
disappears from the
display.
USB
To
Press
Select a folder
+/–.
Select a file
./>
.
Search for an
audio file by its
folder name and
file name and start
playback the audio
file (TRACK
SEARCH)
Use the controls on the
unit for this operation.
Turn OPERATION
DIAL to select the folder
you want, then press
ENTER.
Turn OPERATION
DIAL to select the file
you want, then press
ENTER.
To return to the parent
folder, press RETURN.
Find a point in a
file
Hold down m/M
on the remote during
playback, and release
the button at the point
you want.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
lights up in the display.