Sony 3-287-077-14(2) - Manual (Page 16)

16 GB
Playing an AUDIO CD/
MP3 disc
1
Select the CD function.
Press CD (RM-AMU006) or press
FUNCTION +/– (RM-AMU008)
repeatedly (or press CD on the unit).
2
Place a disc.
Press Z OPEN/CLOSE on the unit,
and place a disc with the label side up
on the disc tray.
To place additional discs, slide the disc
tray with your finger as shown above.
To close the disc tray, press Z OPEN/
CLOSE on the unit again.
Do not forcibly push the disc tray to
close it as this may damage the unit.
3
Start playback.
Press N (or NX on the unit).
4
Adjust the volume.
Press VOLUME +/– (or turn
MASTER VOLUME on the unit).
Other operations
* When using an AUDIO CD, you can use the
same operation to select a track.
Basic Operations To Press
Pause playback X (or NX on the unit).
To resume play, press the
button again.
Stop playback x .
Select a folder on
an MP3 disc +/–.
Select a track or
file . />.
Find a point in a
track or file Hold down m/M on
the remote during
playback, and release the
button at the point you
want.
Select Repeat
Play REPEAT repeatedly
until “REP” or “REP1”
lights up in the display.
Select a disc DISC SKIP (or
DISC 1 – 3 on the unit) in
stop mode.
Search for an MP3
file by its folder
name and file
name and start
playback the MP3
file (TRACK
SEARCH)* Use the controls on the
unit for this operation.
Turn OPERATION
DIAL to select the folder
you want, then press
ENTER.
Turn OPERATION
DIAL to select the file
you want, then press
ENTER.
To return to the parent
folder, press RETURN.
Switch to CD
function from
other function DISC 1 – 3 on the unit
(Automatically Source
Selection).
Exchange other
discs while
playing EX-CHANGE on the
unit.