Sony SLV-D910N/R - Manual (Page 50)

50 Checking/changing/cancelling timer settings
Checking/changing/cancelling timer
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 9).
• When using a decoder, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SET UP, then press V/v to select
(TIMER), then press ENTER.
The timer programming menu appears.
• If you want to change a setting, go on to the
next step.
• If you do not need to change the settings,
press SET UP to exit the menu.
SET UP
V/v/B/b
ENTER
CLEAR
SET UP
ENTER CLEAR SET UP ENTER v V b B
3 5 0 :0 0 1 : 0 0 SP
2 0 : 0 0 : 3 0 LP
6 0 :3 0 : 0 0 Auto
Off
Off
Off MO 30
WE 2
TU 1
2 2
2
0 2
2
3 2
2 2
PR DATE START STOP SPEED V/P