Sony SLV-D910N/R - Manual (Page 53)

53 A/V Receiver hookup
Ad
v
a
n
ce
d Hoo
k
ups
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
and
.
∗
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “AUDIO SETUP” menu (page 55). If your AV amplifier (receiver) has
an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” menu
(page 55). Otherwise, no sound or a loud noise will come from the speakers.
B-1
B-2
B-1
COAXIAL
OPTICAL
B-2
R
L
VIDEO
AUDIO
DIGITAL AUDIO OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
and
Coaxial digital cord
(not supplied)
l : Signal flow
Stereo audio cord
(supplied)
(red) (white)
to audio input
(white)
(red)
to OUT AUDIO L/R
or
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
Optical digital
cord (not
supplied)
Remove jack
cap before
connecting