Star Micronics ATAR LC-500 - Manual (Page 35)

– 31 –
Selecting a EDS number
In the EDS Modes , use the control panel’s LINE FEED button, while
holding down SET/PARK/EJECT button to select a EDS number.
When pressed the button, current setting of the bank is printed.
Selecting a bank
While in the EDS Modes , use the control panel’s SET/PARK/EJECT
button to select a bank. When pressed the button, current setting of the
bank is printed.
Selecting a switch
While in the EDS Modes , use the control panel’s LINE FEED button
to select a switch. When pressed the button, current setting of the is
switch printed.
Changing a switch setting
After selecting a bank and a switch, press the control panel’s ON LINE
button to turn the switch on and off. When pressed the button, changed
setting of the switch is printed.
Printing the current EDS settings
While holding down LINE FEED button, press the control panel’s ON
LINE button to print out the current switch settings. Asterisks on the
printout show whether a switch is turned on or off.
Exiting the EDS Modes
While holding down SET/PARK/EJECT button, press the control
panel’s ON LINE button to exit the EDS Modes.