Sprint Nextel SPRINT PCSVISION SCP-7000 - Manual (Page 205)

Section 3B: Sprint PCS Vision 189
While connecting, the following message will be displayed on
the screen: Connecting... Please wait.
If you had a previous Sprint PCS Vision connection, the last
page you visited will be displayed when you open your
browser. When this occurs, you may not see the
“Connecting...”message when you start the session. Though
the browser is open, you are not currently in an active data
session — that is, no data is being sent or received. As soon as
you navigate to another page, the active session will start and
you will see the “Connecting...”message.
Net Guard
When you first connect to the Web, the Net Guard will be
displayed to confirm that you want to connect. This feature
helps you avoid accidental connections. You can disable the
Net Guard in the future by selecting Always Auto-Connect
when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ
Select > Settings > PCS Vision > Net Guard.
Ⅲ
Select On to activate the Net Guard.
Ⅲ
Select Off to deactivate the Net Guard.
Note: When enabled, the Net Guard appears only once as long as you
have not turned the phone off and on.
Tip: When Ready Link Guard is set to on, a warning message will
be displayed. Press
Continue (left softkey) to continue.
(See “Setting Ready Link Guard”on page 158.)
Sp
rin
tP
C
S V
isi
on