Sprint Nextel SPRINT PCSVISION SCP-7000 - Manual (Page 57)

Section 2A: Phone Basics 41
The display confirms that the number has been dialed when it
shows “Connecting...”.
To use speed dial for Sprint PCS Ready Link calls:
ᮣ
From standby mode, press the appropriate key and
then press
. (See “Assigning Speed Dialing for
Sprint PCS Ready Link Entries”on page 157.) The display
confirms that the number has been dialed when it
shows “R-Link calling...”
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use
either of the following abbreviated dialing features.
ⅷ
Ph.Book Match allows you to retrieve any desired number
saved in your Contacts by entering only the last three to
six digits of the number, and automatically dials the
retrieved number. (See “To activate the Ph. Book Match
feature”on page 76.)
ⅷ
Prepend allows you to prepend predefined numbers (first
five or six digits) to the last four or five digits you enter,
and then automatically dials the number. (See page 76 to
register a prepend number and activate the Prepend
feature.)
Note: Speed dialing is not available when you are roaming; when
you are roaming off the Nationwide Sprint PCS Network, you
must always dial using 11 digits (1 + area code + number).
Ph
on
e
B
as
ics