Sony DR-BT101IK - Manual (Page 24)

DR-BT101iK_U [US, ES] 4-139-303-11(1)
 US
DR-BT101iK_U [US, ES] 4-139-303-11(1)
Pairing transmitter with other Bluetooth receiving devices
1
Turn on the power of iPod.
(Make sure the iPod is in pause mode.)
2
Connect the transmitter to the iPod (page 15).
3
Place the transmitter and the Bluetooth receiving device to be
paired together within 1 m (3 ft).
4
Set the Bluetooth receiving device to enter “pairing mode.”
See the operating instructions supplied with the Bluetooth receiving
device.
Notes
 Passcode* of the transmitter is fixed at “0000,” “1234,” or “8888.”
Depending on the Bluetooth receiving device, it may be necessary to input
the passcode (in this case, “0000,” “1234,” or “8888”). The transmitter
cannot be paired with a Bluetooth receiving device whose passcode is not
“0000,” “1234,” or “8888.”
 If the Bluetooth receiving device requires a passcode, input “0000.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or
“Password.”
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “pairing mode.”
After about 1 second, the transmitter indicator will flash twice, but
keep pressing the power button.