Sherwood ST-4108F/R - Manual (Page 3)

Introduction
3
UNPACKING AND INSTALLATION READ THIS BEFORE OPERATING YOUR UNIT
Congratulations on Your Purchase!
Your new speaker-system is designed to deliver
maximum enjoyment and years of trouble free service.
Please take a few moments to read this manual
thoroughly. It will explain the features and operation of
your unit and help ensure a trouble free installation.
Please unpack your unit carefully. We recommend
that you save the carton and packing material. they
will be helpful if you ever need to move your unit and
may be required if you ever need to return it for
service. Your unit is designed to be placed in an
upright position and it is important to allow at least four
inches of space behind your unit for adequate
ventilation and cabling convenience.
To avoid interference with the TV picture, place this
unit apart from the TV set.
To avoid damage, never place the unit near radiators,
in front of heating vents, in direct sunlight, or in
excessively humid or dusty locations. Connect your
complementary components as illustrated in the
following section.
CAUTION :TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol in intended to alert the user
to the presence of uninsulated
dangerous voltage within the product s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol in intended to alert the user
to the presence of important operating
and maintenance(servicing) instructions in
the literature accompanying the appliance.
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
Caution:Do not block ventilation openings and fan.
FOR U.S.A. AND CANADA 120V
Units shipped to the U.S.A. and Canada are
designed for operation in 120V AC only.
Observe all, safety precaution with use of a
polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION : To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques,
introduire la lame la plug large de la borne
correspondante de la prise et poussre jusqu au
fond.
FOR YOUR SAFETY