Sherwood ST-4108F/R - Manual (Page 5)

System Connections
5
This ST-4108 is designed to use together with
Sherwood s products.(amplifier/DVD receiver/etc)
Doing so will allow you to operate easily and
conveniently.
In case of connecting other amplifier or receiver to
this unit, contact your dealer or our service
organization.
For proper connections, refer to the operating
instructions of the component connected.
Notes :
Do not connect this unit to the wall AC outlet when
plugging and unplugging connection cords.
Be sure to connect the RCA cord to Audio Input jack
of active subwoofer when making connections.
Never short circuit the + and - speaker cords.
Be sure to connect speakers firmly and correctly
according to the channel (left and right) and the
polarity (+ and -).
Be sure to use the main speakers with the
impedance of over 6 .
When this unit is placed next to the record player,
etc., the howling noise may be heard. In this case,
place this unit apart from the record player, etc.
Because the low frequencies produced by this
subwoofer are non-directional, the placement of this
unit is not critical,. Place this unit by a wall or corner
of the room, etc. as desired.