Samsung SMG-3200 - Manual (Page 56)

4-2
Chapter 4
Configuring the System
5. Then, the user will have the following <Phone Number> window appears, where the user can
define a location to connect the hyper terminal. Since the terminal is directly connected to the
SMG-3200 through a COM port, click the Connect using box and select a corresponding
COM port.
6. Next, the user will the <COMx Properties> window appears, where the user can configure
various options for the selected COM port. Configure each item as shown in the following and
click [OK].
7. Next, a new hyper terminal where the user can set up the SMG-3200 by using console
commands will pop up.