Sony T630 - Manual (Page 59)

This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP and e-mail 59
Receive settings in a text message
Your GSM network operator or Internet service
provider may be able to send the required data
account, WAP and e-mail settings direct to your
phone in a text message.
To request settings from Sony Ericsson
1. Use a PC to go to www.SonyEricsson.com. Select your
region and then use the Configurators to request that
a text message be sent to your phone with the settings
you need.
2. When the message arrives,
• Press Yes to install the new settings.
• After installation, see “Using WAP” on page 66.
Note: If settings already exist in your phone, you
can either keep or replace them. See “Enter or edit
settings manually” on page 60.
Set up with the wizard
If your phone is not set up for WAP, you can ask your
network operator or service provider to provide you
with WAP settings information. Then you can simply
use the wizard in your phone to help guide you through
the relevant settings.
Note: The wizard starts automatically if no WAP
settings exist in your phone.
To set up with the wizard
1. Scroll to Internet services, and select a homepage
(for example Sony Ericsson).
2. Create now? appears. Press Yes .
3. Enter a name for the profile. Press OK .
4. Select Connect Using. Press Edit .
5. Select New Account. Press Add .
6. Select an account type, GSM data or GPRS data.
7. Select New Account, and press
Edit , enter the
following:
• A name for the data account.
• For GSM enter phone number and for GPRS enter
APN (Access point name address) – the address
of the external data network you want to connect
to, either an IP address or a text string.
• Use your user id to log on to the external
data network.
• Use your password to log on to the external
data network.
• Save the new data account.
• Select the new data account to be used.
8. Enter IP address for the gateway.
9. Save the new profile.