Sony HTP-2000 - Manual (Page 28)

masterpage:Left
lename[E:\SEM_Janet\Revision_HTP-
200\J9040000_2103636121HTP1200CEL\2103636121\GB06ADV_HTP-1200-CEL.fm]
28 GB
model name1[HTP-2000]
model name2[HTP-1200]
[2-103-636-12(1)]
Using the SET UP menu to
adjust the receiver
You can adjust various receiver settings using
the SET UP menu.
1
Press MAIN MENU repeatedly to select
“
SET UP ”.
2
Press or repeatedly to select the
parameter you want to adjust.
For details, see “SET UP menu parameters”
below.
3
Press or repeatedly to select the
setting you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 to adjust the other
items.
SET UP menu parameters
The initial setting is underlined.
x DVD-XXXX
(Audio input mode for DVD input)
Lets you select the audio input mode for DVD input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL DVD OPT IN jack.
• COAX
Specifies the digital audio signals input to the
DIGITAL DVD COAX IN jack.
• ANLG
Specifies the analog audio signals input to the DVD
AUDIO IN (L/R) jacks.
x TV-XXXX
(Audio input mode for TV/SAT input)
Lets you select the audio input mode for TV/SAT
input.
• AUTO
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
• OPT
Specifies the digital audio signals input to the
DIGITAL TV/SAT OPT IN jack.
• ANLG
Specifies the the analog audio signals input to the
TV/SAT AUDIO IN (L/R) jacks.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for TV/SAT and
“DEC. PCM” for DVD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
Advanced settings
GB01COV_HTP-1200-CEL.book Page 28 Thursday, September 23, 2004 6:22 PM