Windows 98 second edition, Windows millennium edition – SysKonnect SK-98xx V2.0 User Manual
Page 19
SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows
19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family sup-
porting Windows 98 Second Edition (Windows 98 SE). This driver does not support
Windows NT 4.0 or below, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows 98 SE is able to find, iden-
tify, and configure an adapter automatically.
To install the driver, proceed as follows:
1.
After you have installed the adapter in your computer, boot Windows 98 SE (for details
see chapter 2 "Installation of the Network Adapter").
Windows 98 SE detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet adapter as “PCI
Ethernet Controller” during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2.
Click N
EXT
.
The menu “What do you want Windows to do?” is displayed.
3.
Select the check box S
EARCH
FOR
THE
BEST
DRIVER
FOR
YOUR
DEVICE
(R
ECOMMENDED
).
4.
Click N
EXT
.
5.
Select the source (CD-ROM, floppy disk, hard disk) from which the driver is to be
installed.
6.
Type the path to the driver, e.g.
e:\SK-982x\Windows\Win98SE
, where ”e” is the des-
ignation of the CD-ROM drive on your system.
7.
Click N
EXT
.
The window “Location of driver” is displayed.
8.
Click N
EXT
.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
9.
Click F
INISH
.
10. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98xx family sup-
porting Windows Millennium Edition (Windows Me). This driver does not support
Windows NT 4.0 or below, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows Me is able to find, identify,
and configure an adapter automatically.
To install the driver, proceed as follows:
1.
After you have installed the adapter in your computer, boot Windows Me (for details, see
chapter 2 "Installation of the Network Adapter").
Windows Me detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “PCI
Ethernet Controller” during the boot operation.
2.
Select the check box S
PECIFY
THE
LOCATION
OF
THE
DRIVER
(A
DVANCED
).
3.
Click N
EXT
.
4.
Select the check box S
EARCH
FOR
THE
BEST
DRIVER
FOR
YOUR
DEVICE
(R
ECOMMENDED
).
5.
Select the source from which the driver is to be installed, e.g. R
EMOVABLE
M
EDIA
(Floppy,
CD-ROM).
6.
Select the check box S
PECIFY
A
LOCATION
.