SysKonnect SK-98xx V2.0 - Manual (Page 56)

56 7 Troubleshooting
LED Displays
Once the driver has been installed, the adapter is operational. The current status is indicated
by the LEDs.
Figure 13. Location of the LEDs
The LEDs for the copper adapter have the following meaning:
The LEDs for the fiber adapter have the following meaning:
Marking on
bracket Color Status Description
10 green ON/OFF Link up/down, speed 10 Mbit/s
100 green ON/OFF Link up/down, speed 100 Mbit/s
1000 green ON/OFF Link up/down, speed 1000 Mbit/s
ACT green ON/OFF Receiving/Transmitting /
Not Receiving / Not Transmitting
Marking on
bracket Color Status Description
LINK green ON/OFF Link up/down, speed 1000 Mbit/s
ACT green ON/OFF Receiving/Transmitting /
Not Receiving / Not Transmitting
Copper adapter Fiber adapter