Care and cleaning (continued) – Sunbeam EM2300 User Manual
Page 18
17
On a monthly basis we recommend thoroughly
cleaning the steam wand/arm. To do this soak
the wand/arm in water, ensure that the water
level in the jug is over the wand/arm. Run
steam through the wand/arm for 30 seconds,
then leave to soak overnight. In the morning
turn the machine on and run steam through the
wand/arm again for 30 seconds.
Important: Do not wash parts in the dishwasher.
Do not immerse the unit in water.
Important: Should your steam wand/arm
become blocked, supplied with your espresso
machine is a cleaning wire. The cleaning wire
for the steam arm is the long BLACK pin,
located on the underside of the water reservoir
lid (22). With the cleaning wire insert it into the
hole in the base of the steam wand/arm (23).
Should the steam wand/arm remain blocked,
using the measuring spoon/tamp unscrew the
steam nozzle from the steam arm (24). Clean
the steam nozzle by once again using the
cleaning wire and then flush under running
water.
Care and Cleaning (continued)