Sound Performance Lab 9842 - Manual (Page 16)

Transient Designer
16
Input & Output
Instrumentation amplifier, electronically balanced (differential),
transformerless
Nominal input level ...................................... +6 dB
Input impedance .......................................... = 22 kOhms
Output impedance ...................................... < 600 Ohms
Max. input level .............................................. +24 dBu
Max. output level .......................................... +22,4 dBu
Minimum load ohms ................................... 600 Ohms
Relay Hard Bypass / Power Fail Safety
Measurements
Frequency response ..................................... 20 Hz - 100 kHz
... (100 kHz = -3 dB)
CCMR (common mode rejection) ............. - 87 dBu @ 100 Hz
... - 80 dBu @ 1kHz
.. - 75 dBu @ 10 kHz
. - 70 dBu @ 20 kHz
THD & N ............................................................ 0,004 % @ 1kHz
S/N CCIR 468-3 .............................................. -89 dBu
S/N A-weightened ....................................... -105 dBu
Power Supply
Torroidal transformer ................................... 15 VA
Fuses (230 V / 115 V) .................................... 200 mA /400 mA
Ground-Lift switch, Voltage selector
Dimensions
Housing ............................................................ Standard EIA 19 "/1U,
... 482 x 44,45 x 237 mm
Weight .............................................................. 3,4 kg
Note: 0 dBu = 0.775 V. Subject to change without notice.
Specifications