Star Micronics Line Thermal Printer - Manual (Page 49)

―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-33
3.3.8. Bit Image Graphics
ESC K n1 n2 d1...dk
[Name] Standard density bit image
[Code]
ASCII ESC K n1 n2 d1 ... dk
Hex. 1B 4B n1 n2 d1 ... dk
Decimal 27 75 n1 n2 d1 ... dk
[Defined Area]
1 ≤ {(n1 + n2 x 256) x 3} ≤ printable region
k = (n1 + n2 x 256)
0≤d≤255
[Initial Value] - - -
[Function] Prints bit images using 3 dots wide and 3 dots high per 1 dot of input data.
The following shows the data processing in this command.
• When {(n1 + n2 x 256) x 3} exceeds the printable region, data after d1 is handled as normal data.
• When {(n1 + n2 x 256) x 3} exceeds the printable region that is currently set, only the data in the
printing region is printed.
At this time, all data for the print region is discarded.
• If the current position already exceeds the print region, this command discards all data.
b7 b6 b5 b4 b3 b2 b1 b0
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •
• • •