Sony MK7807V1 - Manual (Page 31)

Applicable Models
BVS-A3232 Analog Audio Routing Switcher
BVS-V3232 Analog Video Routing Switcher
DVS-128 Routing Switcher
DVS-RS1616 RS-422A Remote Routing
Switcher
DVS-TC3232 Time Code Routing Switcher
HDS-X3400 Multi Bit-Rate Routing Switchers
HDS-X3600 Multi Bit-Rate Routing Switchers
HDS-X3700 Multi Bit-Rate Routing Switchers
HDS-X5800 Multi Bit-Rate Routing Switcher
Supplied Accessories
Operation and maintenance manual (1)
BNC T-bridge connector (1)
Specifications
Control signal
REMOTE 1:
S-BUS (BNC type) (1)
Data transfer method: BI-PHASE SPACE
Data transfer rate: 312.5 kb/s
Max. cable length 500 m (when using
Belden 8281, Fujikura 5C2V or
equivalent 75
Ω coaxial cable).
Expandable to 1000 m with a
BKPF-L803 S-BUS Isolator/Expander
REMOTE 2:
D-sub 9-pin (1)
Data transfer method: Conforms to the
EIA RS-422A Cart+
Data transfer rate: 38.4 kb/s
RS-232C:
D-sub 9-pin male (1)
Data transfer method: 8-bit, no parity, 1
stop bit
Data transfer rate: 19.2 kb/s
GPI I/O:
D-sub 25-pin male (1), D-sub 25-pin
female (1)
General
Power requirements:
100 to 240 V AC, 50/60 Hz
Current consumption:
0.25 A
Operating temperature:
0 to 45 °C (32 to 113 °F)
Dimensions (W x H x D):
220 x 88 x 120 mm
(17 3/8 x 1 3/4 x 4 3/4 inches)
Mass:
Approx. 1.5 kg (3 lb 5 oz)
The BKS-R3242A X-Y control unit controls matrix cross
points in routers connected to an S-BUS system. Any
combination of inputs and outputs, pre-defined with the
control terminal, are controllable with a single “take”
button. The names of the selected sources and
destinations are shown on the front panel displays.
Source and destination switching is performed with 16/32
buttons. The monitoring signal can also be selected as a
destination signal.
Features
* Router control in S-BUS systems * Fully compliant with
expanded S-BUS systems * Compact 2U, half 19-inch
rack width design * Four display modes: Type plus
Number display, Description Name display, 4-digit display,
and Level display * Three source/destination selection
systems available * BPS (D) Selection (Button-Per-Source
or Destination) * Type plus Number Selection * Key Pad
Entry (Telephone-style keypad for alpha/numeric entry of
sources/destinations by name) * Eight GPI I/O terminals
standard * Alternate source switching using Chop function
* Sources selectable to levels * Large selector buttons
show source and destination name (Status shown by
button color) * Several crosspoints switchable with a
single button (Phantom function) * Route function for
expanded sources * Number of sources and destinations
controlled expandable with additional units * Control
bridge between RS-422A (cart+ protocol) and S-BUS *
Easy ROM update * Single cable connection * Reduced
depth helps in desk mounting applications
BKS-R3242A
X-Y Control Unit
Rear Panel
29
Routing Switchers
Routing Switchers
*SGC_0011-0038 02.3.16 5:00 PM Page 29