Spectra Logic TAC/COM SERIES - Manual (Page 107)

SM06 Rev. 4.10 Tac/Com Control Head Manual
FEATURE VALID OPTIONS COMMENTS S/W VER.*
The number of channels available for each radio.
Does NOT include guard channels.
Ensure that the number of channels is valid for
the radio-type selected as follows:
RT9600/7200 - any up to and including 126
FLEXCOMM - any up to and including 127
FLEXCOMM SYSTEM - any up to and incl. 125
NT SERIES - 32,64,96,128
FF40 - 6,12,16
SYNTECH I - 80
SYNTECH XTR - 100
ARINC 2x5 and PARALLEL BCD - any
805-1 - 99
CHANS. INST. 6, 12, 16, 22, 32, 64, 80,
96, 99, 100, 125, 126,
127, 128
ASTRO, SPECTRA - any
NTX138, NTX066, NTX403 - any
**RT9600 TONES 8, 32 Set to 8 if using the internal RT9600/7200 tones.
Set to 32 if using the internal TAC/COM tones. 2.20
**RT9600 GRD NONE, ST-ED, F/P
Set to NONE if there is no RT9600/7200 guard
receiver installed.
Set to ST-ED if using the Status Edit mode to
control the RT9600/7200 guards. ST-ED option
is invalid if 'RT9600 TONES' is set to 32.
Set to F/P if using the extra TAC/COM Front
Panel controls to control the RT9600/7200
guards.
2.20
**NTX MODE FM ONLY/FM & AM Allows selection of modulation type (AM
applicable to NTX138-300 only) 2.47
**RT9600 P/BW P/BW Allows selection of either Transmit Power control
or Bandwidth control 2.47
**NT GRD INST YES, NO
This line will appear once for each NT-series
radio that is installed. Set to YES for each radio
that has a guard receiver installed.
2.21
**NT136 FM ONLY, AM/FM
This line will appear once for each NT136-type
radio that is installed. Set to FM ONLY for a
standard NT136 radio. Set to AM/FM for an
NT136-PAS radio.
2.22
**CHAN LBL C/H, SPECTRA This line will appear once for each SPECTRA-
type radio that is installed. These selections
indicate the source of the Labels (LBL)
displayed, either from the Control Head or the
Spectra radio. 2.44
** ASTRO TYPE W4, W5, W7, W9 This line will appear once for each ASTRO-type
radio that is installed. These select the type of
Astro control head for which the T99 Astro radio
has been configured.
Note: For the XTL series, W9 MUST be selected
for proper operation
2.52
* Software version in which the feature was introduced.
Except where otherwise noted, all later versions also include the feature.
** These will appear only if the radio has been selected in the ‘RADIO’ box of the Feature column.
End of section 3
Jan 4, 2006 Page 3-33
ENG-FORM: 806-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.