Sony CMT-CP1 - Manual (Page 16)

16
8
Press TAPE X (or X on the remote).
Recording starts.
To stop recording
Press TAPE x (or x on the remote).
Tips
• To record from a non-preset station, press
TUNING MODE (or TUNING/PLAY MODE on
the remote) repeatedly in step 3 until “AUTO”
and “PRESET” disappear, then press
TUNING +/– (or j/J on the remote)
repeatedly to tune in the desired station.
• To record with the Dolby NR system on, press
DOLBY NR on the remote before step 8. “;”
appears.
• If you hear static while you are recording an AM
radio program, adjust the AM antenna to improve
the reception.
Recording from the radio
(continued)
2
Press TUNER BAND (or
TUNER/BAND on the remote) to
select FM or AM.
3
Press TUNING MODE (or
TUNING/PLAY MODE on the
remote) repeatedly until “PRESET”
appears.
4
Press TUNING +/– (or j/J on
the remote) repeatedly to display
the preset number of the desired
station.
3FM1005
PRESET STEREO
TUNED
MH z
Preset number Frequency
5
Press TAPE EJECT A and insert a
recordable tape into the cassette
holder.
With the side you want to
record on facing towards you
A
bB x
m M
X z
?/1
EJECT
MD/VIDEO TUNER
TAPE
REC
CD–SYNC
TUNER
BAND
TUNING
VOLUME STANDBY DSG
CD TAPE
6
Press REC z (or z REC on the
remote).
The tape stands by for recording.
“
” and “ ” appear.
7
Press DIR MODE on the remote
repeatedly to select “ ” to record
on one side of the tape, or “
”or
“ ” to record on both sides.