Sony CMT-CP1 - Manual (Page 29)

29
Other Features
7
Set the stopping time by repeating
step 6.
The starting time, the stopping time,
“TUNER”, and the preset station appear
in turn, then the original display returns.
8
Press ?/1 to turn off the system.
When recording starts, the volume level
is automatically set to the minimum.
To check the settings
Press TIMER SELECT on the remote
repeatedly until “c REC” disappears, then
press TIMER SELECT on the remote
repeatedly until “c REC” appears again.
The preset items appear in turn.
To turn off the REC Timer
Press TIMER SELECT on the remote
repeatedly until “c REC” disappears. To turn
the timer on again, press TIMER SELECT on
the remote repeatedly until “c REC”
appears, then press ?/1 to turn off the
system.
Tip
Once you set the REC Timer, the time settings will
remain in the system’s memory until you change
them, even when you turn the system or the REC
Timer off. The settings that were last used will be in
effect when you turn the timer on again.
Notes
• The system will turn on 15 seconds before the
specified starting time.
• If the power is on at the specified starting time,
recording will not occur.
• The timer will not operate if the starting time and
the stopping time are the same.
• When you have set the Sleep Timer, the REC
Timer will not operate until the Sleep Timer
function is turned off.
• You cannot operate the Daily Timer and the REC
Timer at the same time.