Troubleshooting 83 – SMC Networks Barricade SMCWBR14-G User Manual
Page 95
Advertising
Troubleshooting
83
2. Type ipconfig/release.
3. Then type ipconfig/renew.
D. The 10/100 LED does not light after a connection is
made.
1. Check that the host computer and the Wireless Barricade are
both powered on.
2. Be sure the network cable is connected to both devices.
3. Verify that Category 5 cable is used if you are operating at
100 Mbps, and that the length of any cable does not exceed
100 m (328 ft).
Advertising