SMC Networks Barricade SMCWBR14-G - Manual (Page 97)

Troubleshooting
85
F. If you forgot or lost the password:
Set the Wireless Barricade to its default configuration by pressing
the reset button on the back panel for 10 seconds or more. There
is no password by default.
G. If all other recovery measures fail, and the Wireless
Barricade is still not functioning properly, take any of
these steps:
1. Reset the Wireless Barricade’s hardware using the web
interface, or through a power reset.
2. Reset the Wireless Barricade to its default configuration by
pressing the reset button on the back panel for 10 seconds or
more. Then click LOGIN to access the management interface.