Swann REMOTECAM RMC190210T - Manual (Page 13)

13
Using the RemoteCam as a WebCam
You can use the RemoteCam as a webcam. To do so, you’ll need to grab the drivers
from our website, and install them to your PC. Then, you just have to change the
mode of the RemoteCam once it’s connected to your PC.
Go to • http://www.swannsecurity.com/downloads/drivers/
Open the folder called “ • RemoteCam”.
Download and run the file named “SPCA1528_V2220_MultiLan_090217”. •
Follow the onscreen prompts. This program will install the drivers for the •
webcam. If you get any “User Account Control” messages, allow the
installation to proceed (or the webcam functions won’t work).
Once the installation is completed, attach the
• RemoteCam to your computer
as detailed above.
When the computer detects the
• RemoteCam as an external storage device,
press and hold the power button for one second.
Your PC will automatically finalize installing the webcam.
•
The • RemoteCam will appear in lists of available video devices as “SPCA1528
Video Camera Device”.
System Requirements for Webcam Functions:
Interface Type USB 2.0
Processor Pentium IV or above
RAM 1GB or greater
Video Card Intel 945 or greater
Hard Drive Space Minimum 1GB free
Operating System(s) Microsoft Windows XP ®
Microsoft Windows Vista ®
Microsoft Windows 7 ®
The drivers for the webcam functions are not compatible with Mac-based systems.
Windows is a trademark of Microsoft Corporation in the United States and other countries.
Mac is a registered trademark in the United States and other countries.