Installing the drivers – Sierra Wireless 595U User Manual
Page 14
6
Installing the Software
Installing the Drivers
To install the drivers:
1.
Run Sprint Connection Manager. (Double-click the program’s icon [
] on
your desktop.)
2.
Wait for Sprint Connection Manager to start up and display “No device...”.
3.
Slide the front panel off the Sprint Mobile Broadband USB modem.
4.
Hold the battery so that the side with two white arrows faces up and the
gold contact points on the end of the battery line up with the gold contact
points on the Sprint Mobile Broadband USB modem. Insert the battery into
the device.
5.
Slide the front panel onto the Sprint Mobile Broadband USB modem until
the panel clicks into place.
6.
Slide the lever on the bottom of the device in the direction indicated by the
triangle to release the device’s USB connector.
7.
Adjust the USB connector to the desired angle.
Warning:
To avoid the risk of explosion, use the same battery model when replacing
the battery. Properly dispose of the used battery.