System o operation – ScyTek Electronics 3000Plus Series User Manual

Page 8

Advertising
background image

Page 4 - Galaxy 3000 Plus

Remote Arming

The system monitors 6 independent areas (

zones) while armed: doors, hood, trunk, shock sensor, optional

sensor input, and the network port for future expansion.
To Arm the System:

1. Turn off the ignition.

2. Press Button 1.

· The siren will chirp once.*

· The doors will lock.

· The parking lights will flash once.

· The LED will turn on red, to indicate the starter defeat is activate.

3. 10 seconds after Arming:

· The LED will start blinking to indicate that the doors, hood, trunk and sensor inputs are being

monitored.

* During Arming, if the system detects a bad sensor or an open zone, the system will chirp 4 additional

times and ignore that input, but keep all other areas protected.

Once Armed, the alarm will trigger when any of the following occurs:

·

The doors are opened.

·

The hood or trunk is opened.

·

The shock sensor detects an impact to the vehicle.

·

An optional sensor is disturbed.

When the alarm triggers, the siren will sound, the horn will honk, and the parking lights will flash. If

the system is triggered by the doors, hood, or trunk, the system will alarm for 45 seconds. If triggered

by the sensor inputs, the system will alarm for 30 seconds.
In the event the alarm is triggered and remains triggered continuously by the same sensor or input

during a single arming cycle, that sensor or input will be automatically bypassed until the next time

the system is armed.
If the Shock Sensor detects a light impact to the vehicle the siren will chirp 5 times as a warning

indication.

Remote Disarming

To Disarm the System:

Press Button 1.

· The siren will chirp twice.*

· The doors will unlock.

· The parking lights will flash twice.

· The dome light will turn on.

· The LED will turn off.

* During Disarming, if the system was triggered while away from the vehicle, the siren will chirp 3 times, the parking

lights will flash 3 times, and the LED will flash to indicate triggered zone. See

Tamper Alert for zone listing.

System O

Operation

Advertising