Adjusting the osd screen (dvi and pc), Osd main menu, Adjusting brightness, contrast, volume – Siemens CMTC1720 User Manual
Page 11: 7adjusting the osd screen (dvi and pc), 1 osd main menu, 2 adjusting brightness, contrast, volume
Adjusting the OSD Screen (DVI and PC)
11
Siemens Building Technologies
Fire Safety & Security Products
10.2006
7
Adjusting the OSD Screen (DVI and PC)
7.1
OSD Main Menu
The OSD main menu is composed of text and graphics.
1.
Press the Menu/Exit button
Î
For adjusting the OSD screen the following options are available:
Fig. 1 Options of the OSD main menu
2.
Select the desired option by using the two ▲/+,▼/- buttons.
Î
The selected option is highlighted in yellow.
3.
Press the Source/Enter button to enter the submenu for adjusting items.
4.
Change the value you wish to adjust by using the ADJUST ▲/+,▼/- buttons
5.
Press the Menu/Exit button once.
Î
The settings will be automatically saved to the monitor's memory.
Î
The OSD main menu disappears.
NOTE
If the Menu/Exit button is not pressed, the adjusting screen will automatically disappear after a preset
time (in seconds) and the settings will not be saved.
7.2
Adjusting Brightness, Contrast, Volume
Open the OSD main menu and select the option MAIN ADJUST, see chapter 7.1:
OSD Main Menu.
There are three items on this submenu:
z
BRIGHTNESS
This option is used to adjust the brightness of the screen.
z
CONTRAST
This option is used to adjust the image contrast.
z
VOLUME
This option is used to adjust the sound volume.