Sony SLV-D910B - Manual (Page 21)

Getti
ng Sta
rted
21 Presetting channels
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SET UP, then press V/v to select
(OPTION) and press ENTER.
2 Press V/v to select “Installation”, then press
ENTER.
The “INSTALLATION” menu appears.
SET UP
V/v/B/b
ENTER
O RETURN
SET UP
ENTER
Langue
Installation
Veille Auto
Messages Ecran
Réglages Utilisateur
L’horloge
:Français
[ Non ]
[ Oui ]
RETURN
OPTION
SET UP ENTER v V
ENTER
Installation Manuelle
Installation Auto
RETURN
INSTALLATION
SET UP ENTER v V
continued