Sony GC79 - Manual (Page 43)

GC79 Manager Telephony Settings Screen 43
Selecting a data divert setting:
1. To obtain your current data divert settings from the network, click Retrieve.
2. Select Always if you want to divert all the incoming calls to a specific phone number.
3. Select the Always check box and enter the destination number or click to choose a phone
number from your phone book. Click OK.
4. Click Apply to transfer your settings to your GC79. This may take a few seconds.
Your data divert setting has now been stored in the network.
Restrict Calls
Restricting a certain type of call means that this type of call cannot be made to or from your GC79.
You can restrict different types of outgoing and incoming calls.
The following call types can be restricted:
• all outgoing calls.
• all outgoing international calls.
• all outgoing international calls except to your own country.
• all incoming calls.
• all incoming calls when you are abroad (when roaming).
A password, issued with your subscription, is required to turn a call restrict on or off. Contact your
network operator for further information.
Restricting Fax and Data Calls
To Change the call restrict status for fax and data calls:
1. To get your current call restrict settings from the network, click Retrieve.
2. Tick the boxes next to the call types that you want to restrict.
Only select one outgoing and one incoming option.
3. When you have finished, click Apply.
4. Type your restriction password into the dialog and click OK.
Your call restrict settings have now been changed and stored in the network.
Wireless
802.11
To configure, monitor and control your GC79 wireless LAN connections, click on the Launch
Wireless Control Panel button.
The Wireless Configuration Utility is displayed. See Create a Wireless LAN Connection on page 25
for details.