Windows error codes – Sony GC79 User Manual

Page 56

Advertising
background image

56

Troubleshooting

Windows Error Codes

Windows

®

98

Error 619:

The port is

disconnected

during dial-up

An ISDN mode (V110 or V120) has been selected when creating

a connection, but is not supported by the network.

Select Analogue mode when creating the connection in the

Connection Wizard.

Error 629:

The port was

disconnected

by the remote

machine during

dial-up

Telephony settings are set to pulse dialling, change to tone dialling.

Check the dialling settings for the current location (In Control
Panel

Phone and Modem Options

Dialing Rules

Location

Edit) and change the Dial using setting to tone,

or (if Pulse is a necessity), create a new location called GC79

Anywhere and set the dialling to Tone. GC79 anywhere location

should then be used whenever you use the GC79.

Error 630:

The port was

disconnected

due to hardware

failure during

dial-up

A Dial-up networking connection is already connected. Close the

connected dial-up and try again.

Error 645:

Internal

authentication

error during

dial-up

Incorrect APN or CID selected for network.

Modify your Dial-up Connection, see Create a GPRS, HSCSD or

CSD Connection on page 21 for more details. Make sure that the

APN file contains the name of the access point your network

operator is using. See the support section on

www.SonyEricsson.com site for a full list of network

operator APNs.

Error 650: The

Remote Access

server is not

responding

during dial-up

Incorrect User ID and/or password. Re enter correctly.

Error 678:

Computer you

are dialling is

not responding

during dial-up

Either: Service is not supported by SIM (usually for CSD/HSCSD)

or the computer is not answering.

1 Check SIM settings with your service provider if necessary,

2 Make sure that the server you are dialling is OK,

3 Make sure that Analogue mode has not been selected with

57.6kbps data rate (V110 or V120 mode must be selected

and supported by the network).

Error 720:

No PPP control

protocols

configured

during dial-up

The service is not supported by the SIM, usually appears when

you are trying to connect to GPRS Internet. Contact service

provider to enable GPRS Internet access on SIM card.

Advertising