Sony CDP-CX153 - Manual (Page 16)

Playing CDs
16 EN
Checking the programmed order
You can check your program before or after you start
playing.
Press CHECK.
Each time you press this button, the display shows the
disc and track number of each step in the programmed
order. (When a whole disc is programmed as one step,
“AL” appears instead of the track number.) After the
last step in the program, the display shows “END” and
returns to the original display.
Changing the programmed order
You can change your program before you start playing.
To
Erase a track or disc
Erase the last track or
disc in the program
Add tracks or discs to the
end of the program
Change the whole
program completely
Erasing the programs stored in memory
1
Press PROGRAM repeatedly in the stop mode
until the program number (PROGRAM 1, 2 or 3)
you want to erase appears in the display.
2 Hold down CLEAR until ”ALL CLEAR” appears
in the display.
You need to
Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR.
Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
Follow the programming
procedure
Hold down CLEAR until “ALL
CLEAR” appears in the display to
erase the whole program, then
create a new program following
the programming procedure.
6
Press ENTER.
The disc being programmed
DISC TRACK STEP
PROGRAM 1 CD
2
1
0 1 1
The track being
programmed Playing order
7 To program other discs/tracks, do the following:
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
8
Press ( to start Program Play.
To cancel Program Play
Press CONTINUE.
The programs remain even after Program Play ends
When you press (, you can play the same program
again.
When you press PROGRAM during Continuous or
Shuffle Play
The program you played last time appears and will be
played after the current track.
The programs remain until you erase them
If you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.
Repeat Steps
2, 3 and 6
4 to 6
2 to 6