Sharp PJLINK XG-C435X-L - Manual (Page 16)

-14
Remote Control
30 STANDBY button
For putting the projector into
standby mode.
32 KEYSTONE button
For entering the Keystone
Correction mode.
35 FREEZE button
For freezing images.
36 MAGNIFY (Enlarge/Reduce)
buttons
For enlarging/reducing part of the
image.
44
39
ENTER button
For setting items selected or
adjusted on the menu.
35 BREAK TIMER button
For displaying the break timer.
34 INPUT buttons
For switching to the respective
input modes.
35 AUTO SYNC button
For automatically adjusting images
when connected to a computer.
39 PAGE Up/Down buttons
Same as the [Page Down] and
[Page Up] keys on a computer
keyboard, when with the USB
connection (using a USB cable or
the optional remote receiver).
RESIZE button
For switching the screen size
(NORMAL, STRETCH, etc.).
37
PICTURE MODE button
For switching the picture mode.
36
Volume buttons
For adjusting the speaker sound
level.
34
AV MUTE button
For temporarily displaying the black
screen and turning off the sound.
34
MENU button
For displaying adjustment and
setting screens.
43
WIRED R/C JACK
For controlling the projector by connecting
the remote control to the projector.
ON button
For turning the power on.
30
L-CLICK button
For the Left click when with the
USB connection (using a USB
cable or the optional
remote receiver).
MOUSE/Adjustment buttons
('/"/\/|)
• For moving the computer cursor
when with the USB connection
(using a USB cable or the optional
remote receiver).
• For selecting and adjusting on-
screen items.
R-CLICK/RETURN button
• For the Right click when with the
USB connection (using a USB
cable or the optional remote receiver).
•
For returning to the previous
display.
ECO+QUIET button
For lowering the noise of the cooling
fan and extending the lamp life.
35
39·43
39·43
Part Names and Functions
Using the Remote Control with a Signal Cable
When the signals from the remote control cannot be reached due to the positioning of the projector, use a
ø3.5 mm minijack cable to connect the remote control to the projector. Now you can control the projector
with the remote control.
Projector
(Rear view)
Remote control
To WIRED
R/C JACK To WIRED
REMOTE terminal
ø3.5 mm minijack cable (commercially available or
available as Sharp service part QCNWGA038WJPZ)
Note
•
The wireless remote function is not possible when the ø3.5 mm minijack cable is connected to the projector.
Should the wireless remote operation be required, the ø3.5 mm minijack cable should be disconnected
from the projector.