Sharp PJLINK XG-C435X-L - Manual (Page 59)

-57
Appendix
Replacing the Air Filter
• This projector is equipped with air filters
to ensure the optimal operating condition
of the projector.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA022WJKZ) when
it is no longer possible to clean.
Replacing the Air Filter
1
Press STANDBY/ON on the pro-
jector or STANDBY on the remote
control to put the projector into the
standby mode.
•
Wait until the cooling fan stops.
2
Disconnect the power cord.
•
Unplug the power cord from the AC socket.
3
Remove the filter cover.
•
Turn over the projector. Pull down the car-
rying handle (
1 ), grab the tab ( 2 ) and slide
open the filter cover ( 3 ).
4
Remove the air filter.
•
Pick the air filter up with your fingers and lift
it out of the filter cover.
STANDBY button
AC socket
Tab
2
1
3
STANDBY/ON
button