Sharp PJLINK XG-C435X-L - Manual (Page 37)

-35
Basic Operation
Displaying and Setting the
Break Timer
1
Press BREAK TIMER.
•
The timer starts to count down from 5 min-
utes.
On-screen display
2
Press '/"/\/| to adjust the length
of the break time.
•
Increases with ' or |
5 minutes s 6 minutes s 60 minutes
•
Shortens with \ or "
4 minutes s 3 minutes s 1 minute
•
The break time can be set in units of one
minute (up to 60 minutes).
Press BREAK TIMER.
Note
•
Break Timer does not function while the projec-
tor is operating the “Auto Sync”, “FREEZE” or
“AV MUTE” functions.
Switching the Eco+Quiet
Mode
Press ECO+QUIET to switch the Eco+Quiet
mode between on and off.
•
When the Eco+Quiet Mode is set to “ON”, the sound
of the cooling fan will turn down, the power consump-
tion will decrease, and the lamp life will extend.
Note
•
Refer to “Checking the Lamp Life Status” on
page
53 for details of the Eco+Quiet mode.
Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detecting input
signal after the projector turns on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
Note
•
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page
47 .)
Freezing a Moving Image
1
Press FREEZE.
•
The projected image is frozen.
2
Press FREEZE again to return to
the moving image from the cur-
rently connected device.
MOUSE/Adjustment
buttons ('/"/\/|)
FREEZE
button
AUTO SYNC
button
BREAK TIMER
button
ECO+QUIET
button
Canceling the break timer display function