Inserting the battery – Sprint Nextel Palm Treo 800w User Manual
Page 28
28
Section 1A: Setting Up Your Palm
®
Treo™ 800
W
Smart Device
Inserting the Battery
1.
Gently press the battery door while sliding it downward to remove it.
1
Battery Contacts
2
Device Contacts
2.
Align the battery contacts with the device contacts, and then press the battery into place.
3.
Slide the battery door onto the back of the Treo until it clicks into place. (Your device
screen turns on and the Palm logo screen appears. Wait for the progress bar on the
Palm logo screen to fill and for the Windows Mobile
®
screen to appear. If your Treo
doesn’t turn on, you need to charge it by connecting it to the AC charger. If it still doesn’t
start, do a soft reset. See “Resetting Your Palm
WARNING
Use only batteries and chargers that are approved by Sprint or Palm with
your device. Failure to use an approved battery or charger may prevent your
device from turning on or charging; may void your Treo warranty; and may
increase the risk of your device overheating, catching fire, or exploding,
which may also result in serious bodily injury, death, or property damage.
1
2