SIGMA HDTV5 - Manual (Page 22)

22
Help
Online help guide of SMPlayer program.
About
Show the version, manufacturer and program info.
Exit program
Quit the SMPlayer program.
Appendix. Remote Control
Replacing batteries
- Use a 3 V lithium battery for the replacement. Basically, the battery is provided when you purchase SIGMA
HDTV5 USB V1.
1. Pull down the battery tray of the remote control. 2. Insert a 3V lithium battery into the tray as drawn below.
3. Push the battery tray back into the remote control then fix it sounded“clicking”.
[NOTE]
You can check whether it is worked or not by pressing the buttons of the remote control.
The red lamp on the remote control will be on if the battery is inserted correctly.