SIGMA HDTV5 - Manual (Page 7)

7
2-2. Connecting the USB cable
1. Connect the USB cable to the USB port of SIGMA HDTV5 USB V1
2. Connect the other side of the USB cable to the USB port of your system as drawn below.
2-3. Connecting the antenna cable
To receive the over-the-air digital broadcasts, connect an indoor or outdoor antenna (UHF)cable as drawn
below.
Note: Make sure that your system supports
USB2.0 interface before the connection
Make sure that you are in a digital TV reception area to
receive the over-the-air digital TV signals.
It is important that you need to have a good UHF
antenna for a better digital TV reception.
Clear QAM support may be different according to your
local DTV service providers
Connecting
USB cable