Siemens C450 - Manual (Page 18)

17
SMS (text messages)
Gigaset C 450 / IM-Nord EN / A31008-M1706-R201-1-7619 / sms_neutral.fm / 27.7.05
Send
Forward the text of an SMS to another recip-
ient (page 15).
Adding a number to the directory
Adding the sender's number
You are reading an SMS in the incoming mes-
sage list.
§Menu§ Press the display key.
Continue see page 13.
Setting SMS centre:
Entering/changing SMS centres
¤
You should find out about the services and
special functions offered by your service
provider before you make a new applica-
tion and before you delete preconfigured
phone numbers.
§Menu§
¢
SMS
¢
Settings
¢
Service Centres
q
SMS centre (e.g. select Service
Centre 1 ) and press §OK§ .
You have the following options:
Active Send Serv. Centre
If the SMS messages are to be sent through
this SMS centre, press §OK§ to activate the
SMS centre ( ‰ = on). If a different SMS cen-
tre was active previously, then this will be
deactivated.
SMS Centre No.
Enter the number of the SMS centre and
press §OK§ .
Sending an SMS through another SMS
centre
¤
Activate the SMS centre (2 or 3) as the active
send service centre (page 17).
¤
Send the SMS.
SMS to a PABX
u You can only receive an SMS when the Call-
ing Line Identification (page 9) is for-
warded to the extension of the PABX (CLIP).
The CLIP of the phone number for the SMS
centre is evaluated in your Gigaset.
u Depending on your PABX, you may have to
add the access code (external line prefix)
before the number of the SMS centre.
If in doubt, test your PABX e.g. by sending an
SMS to your own phone number, once with
and once without the access code.
u When you send SMS messages, your sender
number may be sent without your extension
number. In this case the recipient cannot
reply to you directly.
Sending and receiving SMS on ISDN PABXs is
only possible via the MSN number assigned to
your base station.
Activating/deactivating the SMS
function
When you switch off you cannot send or receive
any SMS with your phone.
Settings which you have made for sending and
receiving text messages (the numbers of SMS
centres) and any entries in the incoming mes-
sage and draft message lists will be retained
even after the function is deactivated.
§Menu§
4 I O 2 L
~ Q
§OK§ Deactivate the SMS function.
Or:
~ 1
§OK§ Activate the SMS function (default
settings).
SMS troubleshooting
Errors when sending
If an SMS cannot be sent for a longer period of
time, it is moved to the incoming message list
and given the status Error XX.
Note:
You can create a special directory for text messages
within your main directory by putting a star (*) before
the names.
An appended mailbox ID will be copied to the direc-
tory.
E0 Calling Line Identification permanently withheld
(CLIR) or Calling Line Identification not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see self-help.