Sony 4-183-746-11(1) - Manual (Page 27)

Ba
si
c
s
27
When the correct exposure has been obtained for the photo just taken, the
TEST button on the control panel blinks in green.
• The photo will be under-exposed because of a lack of luminescence if taken
before charging is complete.
• Press the shutter button after making sure that charging is complete when using
the flash unit with the self-timer.
• If your camera has an AUTO mode or Scene Selection mode, they are dealt with
here as program auto.
• The flash mode selected (auto flash ( AUTO), fill-flash ( ), or un-full-flash
( )) depends on your camera. For details, refer to the operating instructions of
your camera.
Flash range
Press the shutter button halfway down.
The flash range for the proper exposure is displayed on the LCD panel. Make sure
that the subject is within this range and then take the photo.