Rear, 3.rear, Introduction – Sun Microsystems Computer Monitor User Manual
Page 13
Advertising
User’s Manual - 3
Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.
Introduction
Rear
1. Power port
Connect the power cord for your monitor to the power port on the
back of the monitor.
2. DVI Port
Connect the DVI Cable to the DVI Port on the back of your Monitor.
3.
Signal port
Connect the signal cable to the 15-pin, D-sub connector on the back
of your monitor.
a. Power on/off Switch
Note:
See
for further information regarding cable connections.
1
2
3
a
Advertising