Sun Microsystems Computer Monitor - Manual (Page 20)

User’s Manual - 10
Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.
On-Screen Display
OSD How to adjust
Follow these instructions to change the horizontal
position of the monitor's entire display.
1. Push the Menu button.
2. Push the [-] button or [+] button until the Position screen is
displayed.
3. Push the Menu button and then press the [-] button or [+]
button to open the H-Position screen.
4. Push the Menu button again and use the [-] button or [+]
button to change the horizontal position of the monitor's
viewing area.
Note: Not Available
This function doesn’t work in Digital input.
Follow these instructions to change the vertical position
of the monitor's entire display.
1. Push the Menu button.
2. Push the [-] button or [+] button until the Position screen is
displayed.
3. Push the Menu button and then press the [-] button or [+]
button to open the V-Position screen.
4. Push the Menu button again and use the [-] button or [+]
button to change the vertical position of the monitor's viewing
area.
Note: Not Available
This function doesn’t work in Digital input.
P osition
Position
50 50
50 50
H-Position
V-Position
Position
56 56
50 50
H-Position
V-Position
Position (H-Position)
Position
50 50
50 50
H-Position
V-Position
Position
50 50
56 56
H-Position
V-Position
Position (V-Position)